Items from Japan!!

[scrape]

Hi. I am a parts supplier in the Aomori Prefecture of Japan and I am beginning to reach out to customers in the states. I'm American and remember how difficult it was to find decently priced items from Japan rather than the 'JDM' inflated price that many people and other businesses offer back in the states. I've lived here for a long time now and am confident that we can find just about whatever part you request. I will answer all request even if all you want is pictures or a price quote. I've tried to post pictures of some of my in stock items but I was told that the files were too big, but I'll be happy to send pictures via e-mail if you like.

I could write a novel with my parts list, but to give you an idea I have carbon fiber intakes for Honda Integras, Carbon Fiber Denji projector lights for Civic EGs; parts from Skylines, EVOs, cat back exhaust from S13-S14s and later model STIs. Also engines, and internal parts are available. We have worked hard to establish a realiable network. If I don't have it right now, I can get it soon. Performance or show, new or used. I'll look forward to hearing from you.

Send me an e-mail n9wizzards@yahoo.com or post replies here. I'll check this thread at least once a day.

Jon (Kezuru)

[john]

I want a left hand drive r32 or r33 skyline.

[Nate]

JDM Hilux Surf with NOS

You should pay to advertise here, then you can post stuff like this.

[floored4door]

Yeah you should pay for advertising.

EG Power folding Mirrors, with harness, relay, and switch for a sedan with wiring diagram. Can you get that? And how much?

[TheJackal]

i want a pink s2000

[HondasTrail]

Can I get a JDM flux capacitor?

[taikahn]

if you have any ep3 specific stuff... post it over at corep3.com

[STIBungy]

If you're referring to that pink S2K from 2F2F, I'll take that Suki chick. :D

i want a pink s2000

[scrape]

john:
If you want the whole car than my advice is to buy through Motor X in California. They have their own website, and I can't beat what they would charge you (not yet anyway).

Nate
Okay finding a Hilux Surf is easy. I don't own any boats, so I would ask that you cover any shipping charges I'll get you a hard figure tomarrow, but the truck itself will cost you anywhere from $4,000 to $6,000 American. This is with no rust or Major dents or cigarette burns on the seats. Hilux Surfs often come with Recaro racing seats stock, but you already knew that didn't you?

floored4door
Yes I can get that. The folding mirrors are very popular all over Japan due to the trend of small home garages. Your price will be somwhere close to $200 but there won't be any shipping cost added to your price. The wiring diagram will not be in english-is that okay? I'll post hard prices in about 12 hours or so being that I'm replying from my home.

TheJackal
Hmmm. How much are you willing to spend? And in what condition?

HondasTrail
Sorry I'm all out right now, there a hot item. Check with me next month when I get my new shipments.

taikahn
Give me about a day to get all the pictures and send them to you.

STIBungy
I have one left but it'll cost you.

[stu]

You really do need to pay for advertising.

[ryanman]

Honda Integras
WTF?

[David]

Hook me up with one of those Honda Jazz's in teh JDM penis pink i've been hearing so much about.

[Crx150zc]

Intrested in del sol inside door handles with map lights PM ME

[Conrad]

WTF?

I had a honda integra when i was in japan... I miss it! There is no acura in japan! Made for stooped americans.

[oldskoolracer]

sol door handles would be nice

[monicle]

WTF?

http://repo.jackmoves.com/albums/album143/DCP_2936.sized.jpg
yep theres no acura in japan same as there is no infinity, honda and nissan only.

and WTF is up with not being able to post images.... bastads

[mrsatisfiher]

check your email

[David]

are you a scammer?

[djet820]

I need DA window visors, JDM digital climate control WITH the heater relay so i can get rid of mine because the USDM ones are cable. and how much woudl rear seats cost.

[computingfuture]

WTF?


yeah you only get acuras in the states but you knew that already right?

[computingfuture]

can I get a blue Type R sticker, I want to make my truck quicker.

[john]

/me 5s computingfuture. A couple of NOS stickers would help to, esp if you put them on the underside of your hood. :D :D

[antz]

How much would you do a type r conversion with radiatior support?

[hatrack]

can you get a 89 HB jdm wing with the longer brake light
mark

[Moe]

used titanium cat-back exhaust for a 98 DC2 SI-R.

[Bedlam]

How about an antenna that will work on a del Sol? I suppose it would cost and arm..or a leg..or both..to ship it here..but they are bound to be cheaper in Japan! :)

-Bedlam

[JdmDb895]

I need Jdm db8 integra 4dr ITR rear seat. password has it for 350 how muhc can u get it for? and 17' volk t37 in gunmetal or broknzE?

[AgressivMX3]

lol, yeah man, this guy needs sum jdm reading glasses yo, then maybe he can see them mad tight dates on the threads.

[STIBungy]

Send Weston the eels girl along with 20-30 live eels. :D

[chris_venturini]

how much for a bluebird sr20det engine?

[myshtern]

How much for a Kia turbo kit?

[Crx150zc]

I guess you stopped responding, I never got word on the del sol door handles

[scrape]

I apologize for not responding to everyone's request. I won't waste your time with an excuse, I hope that you accept my apology. I would ask that your questions be e-mailed to admin@routeredone.com or placingorders@routeredone.com; as our website (routeredone.com) is being updated I have been responding to our customers and shipping orders and in the process have neglected to return to this thread.
JW

Crx150zc
Your Del Sol inside door handles would cost $40US shipping included in a used condition $70US for a new set of 2. This price will apply to all models.

[scrape]

How much for a Kia turbo kit?

I would like to answer your question, but it is not very specific. What model Kia? What type of turbo set up are you looking for?

[scrape]

How much would you do a type r conversion with radiatior support?


Sorry Antz, Route Red One does not do engine conversions, however we will send you the parts that you will need. Would you like that instead?
JW

[scrape]

How about an antenna that will work on a del Sol? I suppose it would cost and arm..or a leg..or both..to ship it here..but they are bound to be cheaper in Japan! :)

-Bedlam


Bedlam,
It wouldn't cost an arm and a leg to ship something that small. Used will cost $30US shipping included. I don't know the price of one new. I will have to make a phone call and get back to you.
JW

[scrape]

how much for a bluebird sr20det engine?


Hi Chris,
At this time it would be best for your wallet to acquire your engine through another company. Because of the weight and size of the shipping container at this time we will not be able to charge you a fair amount of money and in fact will be more than what another company might charge. Our large shipping discounts do not apply to items that heavy. To save you money we would have to send the engine in seperate parts (Pistons, Head, Gaskets, etc) so we usually do not go through the trouble of breaking down an entire engine and cleaning the parts unless the buyer is indeed serious.
JW

[scrape]

I need Jdm db8 integra 4dr ITR rear seat. password has it for 350 how muhc can u get it for? and 17' volk t37 in gunmetal or broknzE?


If we can beat that price then I will let you know, if we can not then....
JW

[scrape]

used titanium cat-back exhaust for a 98 DC2 SI-R.


Hi Moe
Any particular brand or type? There is a wide price range here just as varied as the makers of the product. An estimate would be from $300-$500 US dollar. Shipping included.
JW

[oldskoolracer]

do thoses handles some with the bars and can you also get "GATHERS" SPEAKER COVERS. and the sun visors. the whole ones not the crappy ones that come
stock in the us

[computingfuture]

I guess you stopped responding, I never got word on the del sol door handles


and dont forget my stickers, i need that mad hp yo

[lilsis]

im new but intrested in denji's let me know

[sloweredcivic]

also wonderin about the 88-91 sir rear spoler with the longer brake light?

[RiceNmotioN]

JDM huh....what about European ITR Rear bumber

[jdmEGhatch]

i need me a jdm b16 type r civic head/or sir head not the first gen b16a if its an sir head then i need a 2nd gen or 3rd gen thanks
randall

[stu]

This thread is a year old!

[computingfuture]

n00b

[b16efhatch]

yeah I need A honda protege muffler. Then Ill have all the jdm shit yo!!!

[Forge]

Any parts for a 89-94 240SX or front body panels from a S15?

[kio]

damn, this thread is still around. what ever happend with those folding JDM mirrors for EG's?

[dsm king]

Is Scrape even still a member? Cause I'd really like a rhd crx front clip!

[Skaterkid]

Goddamn, there's a reason this thread was dead for so long!

[floored4door]

damn, this thread is still around. what ever happend with those folding JDM mirrors for EG's?

He never answered me.

[scrape]

My password and screen name are still active here, but as you can see I haven’t made any post in about a year or so. I was surprised to start getting request once again. I apologize if some of you were left hanging last year, but at the time I made an honest effort to get the information that was requested.

The start of any business is always a difficult undertaking and in my particular situation I was not without pitfalls. The core of TR1 (Team Red One) now sits at two, which means that there are two of us calling the shots and a handful of "worker bees" that keep our dream alive. We thought that using the internet would help us reach a bigger demographic and increase our profits quickly, but this was the wrong type of thinking and being freshman in the business world we learned this the hard way as it proved overwhelming. With that said our website was put on the back burner until it became not forgotten but far from a priority.

After receiving a few new request I proposed to my partner that we redesign our website and once again step into this bigger demographic this time more confident and certain in our ability to deliver what the customer needs and wants.

Any request that we receive at this time will be answered and perhaps through your satisfaction we can become a trusted source for j-spec parts or accessories.

Sincerely,
J. Williams
O. Farias
TR1