D15b1 for a D16a6

[Redyetty]

I have a 91 Civic HB non SI, it has a D15b1 in it now, what will I have to change in order to swap in a D16a6. If I use my original intake manifold can I just rewire the distributor to SI? I know this isnt the ideal swap but its cheep. Any help would be greatly appritiated.

[95GSRB18C]

you'll need to do some wiring from Dual Point to Multi Point (2 to 4 injectors), you'll need the resistor box, ECU, and maybe a couple other things im forgetting. I dont even think you can run the DX Intake manifold since its dual point. You're much better off just finding the whole motor with an intake manifold.

[12seccivy]

I have a 91 Civic HB non SI, it has a D15b1 in it now, what will I have to change in order to swap in a D16a6. If I use my original intake manifold can I just rewire the distributor to SI? I know this isnt the ideal swap but its cheep. Any help would be greatly appritiated.

You might be better off with the whole swap.. and wire in the extra injectos..
It sound like a lot of work---> for so little..

[Redyetty]

you'll need to do some wiring from Dual Point to Multi Point (2 to 4 injectors), you'll need the resistor box, ECU, and maybe a couple other things im forgetting. I dont even think you can run the DX Intake manifold since its dual point. You're much better off just finding the whole motor with an intake manifold.

Thanks for your help. If I do get the intake and all, what will I need to do? Thanks agian, I'm new to Hondas.

[stu]

For the money, you will probably be much happier doing a B-series swap.

[Redyetty]

You might be better off with the whole swap.. and wire in the extra injectos..
It sound like a lot of work---> for so little..

Thanks a ton for the help. If I do get the intake and all, what will I need to do. Where can I find the parts? And is it worth it? The only other option I can really afford is to put in another stock 1.5. Thanks again.