a few questions to finish up swap...

[cherrybombcivic]

no, amazingly im still not done, but no fear, its about 95% done and with my work sched, i just dont get to touch it much. im waiting on a passenger side axle, should be in tomorrow morning, then all i have to do is pop that axle in, put some coolant in, hook up the battery and fire it up. anyway here are my questions...

http://members.aol.com/captainme/hose1.jpg
my d series intake manifold didnt have this hose fitting here, where does it go?

http://members.aol.com/captainme/hose2.jpg
im lost on this one....

http://members.aol.com/captainme/hose3.jpg
same question...

http://members.aol.com/captainme/undertranny.jpg
i also have this connecter coming from the underside of my tranny but so far nowhere to plug it into... if it matters the tranny is a y21 from a del sol VTEC. Thanks for any info tobi...

[ryanman]

I think the tubes in pics #1 & #3 go to the throttle body for coolant, hook em up or it will probably get some idle surge.

Pic #2 is just a drain of some sort, just point it down.

The only thing I can think of for pic #4 is the reverse, neutral safety, etc. switches that are in the tranny.

[cherrybombcivic]

thats what i was thinking for number 4. and as far as the hoses i dont think #1 and #3 go to the throttle body, theyre too big, all my throttle body hoses are already hooked up. i could be wrong, it has happened once or twice. ;)

[ryanman]

There should be 2 coolant hoses that go to the throttle body. From what I've seen they're sorta a PITA to get to with the TB bolted on. If your TB doesn't ahve coolant hoses that got to it just get a peice of hose long enough to connect one to the other.

[HONDA GHANDI]

You can just hook those two coolant ports together, it does not hurt the drivability in CA to have them bypassed. The connector on the tranny is the reverse light switch.
The hose coming out of the firewall is the AC drain. point it down so it wont be pinched and drains on the ground.

[cherrybombcivic]

thanks again tobi. i remember asking you a while ago if there was anything you didnt know about honda's. You replied with "the interior codes". You got those down yet? ;)

[HONDA GHANDI]

Type F interior is called Taupe
Thats about it.

[ryanman]

thanks again tobi. i remember asking you a while ago if there was anything you didnt know about honda's. You replied with "the interior codes". You got those down yet? ;)
No thanks to me?????

[cherrybombcivic]

haha, sorry ryanman, thanks to you as well...

[exciv2000]

Tobi never ceases to amaze me with knowledge about hondas. Ryanman did pretty good too, I'm impressed. Good luck with your swap man, hope you get it up soon and get on the dyno and lay down some numbers for us. :)

[cherrybombcivic]

youl get some numbers and a nice vid to go along with it!

[ryanman]

Tobi never ceases to amaze me with knowledge about hondas. Ryanman did pretty good too, I'm impressed. Good luck with your swap man, hope you get it up soon and get on the dyno and lay down some numbers for us. :)
I do know a LITTLE bit about them, I just choose not to share my knowledge alot of the time unless I'm in a good mood, lol.

[HONDA GHANDI]

I do know a LITTLE bit about them, I just choose not to share my knowledge alot of the time unless I'm in a good mood, lol.

Cause youre a selfish bastard. ;NutKick;

Jk glad someone is answering questions in my forum, maybe I should pay more attention.

[ryanman]

haha

You know I'm a nice guy but alot of people here don't know me but seem to judge me so I choose to not help them out.

[HONDA GHANDI]

Yeah now I do, rememeber when you first started here you troll? ;)

[stu]

How would Steve go about removing a wire from the harness, so he can move it somewhere else? Basically going from a 5 wire to a 4 wire.

[HONDA GHANDI]

there is a special tool to remove honda pins from the connectors. Some conectors need thetool some dont. I need more info or pics to tell you.

[stu]

Well, when he sees this, I'm sure he'll comply with your demands.

[HONDA GHANDI]

He must comply or he will be excecuted. (in best robot voice)

[exciv2000]

He must comply or he will be excecuted. (in best robot voice)

you mean twinkie the buck rogers' penis shaped robot?? :rofl:

[ryanman]

Yeah now I do, rememeber when you first started here you troll? ;)
HAHAHA, oh the good ol days. I pissed you guys off soo bad, lol.

I found out who Ricewizard is finally. :cool:

[HONDA GHANDI]

Yeah, hes a big old prick too., But I doubt he ever turns to one of the good guys. :D

[ryanman]

haha

[cherrybombcivic]

heres a pic i stole from someone else, but its the same connector im workin on...

http://www.imagestation.com/picture/sraid77/p4a9685cf3706238579cbf497ece56762/fb3d7567.jpg

[cherrybombcivic]

p.s.

please dont execute me.