Turbo for D15B8?

[CXhatchboy520]

Would the turbo kit for the D16 safely work on my D15B8?

[Mario]

If the exhaust manifolds are the same, I'd imagine most of it would bolt up with no problem...

[95GSRB18C]

yea, i dont think you would have a problem either...

[STIBungy]

I'd swap out the B8 intake manifold for a B7 or even better, a Z6 one. The CX intake manifold is dinky. The intake tubing is about the size of exciv2002's yummy raver girl's wrist.

[Derrickcxhatch]

A cx will last boosted for maybe a day. The rods are like tooth picks. If you want to boost a sohc than buy a d16z6 for around $100-$700 it will be the funnest mod to youre civic if you dont have alot of money.

this is sumthin i posted a long time ago


I have seen you post asking questions about SOHC turbo and d16z6. I am doing the same thing but I have already swapped my z6 in. The z6 in good working order can handle 10psi of boost and be reliable. At this altitude I am going to push 12psi because I am crazy and have a few spare d16's lying around. To run at that psi you will need to have a good fuel set up.

On swapping the z6 please don’t spend a lot of money doing this. Don’t pay someone a thousand dollars for just bolting it up. It took one friend and me 2 days because I did not have all the parts and I had a broken leg. Make shure you’re swap comes with the stock harness it make it easier. You can use you’re stock mounts and shift linkage. If you car is a 92 you will have to do no wiring at all.

An alternative to the z6 is a jdm d15b it is a d15 with a z6 head you still can find parts easy and it is cheap. Link to info http ://asia.vtec.net/article/d15b/

For the swap you will need.
1. Engine and transmition
2. p28 ecu can be found between $100-$150

Turbo info
Links
http://www.honda-tech.com/zerothread?id=335078

http://www.homemadeturbo.com/home/

http://www.turbomagazine.com/tech/0...urbo/index.html apexi turbo if was getting a kit this would be it

http://pub143.ezboard.com/bhondadseries

http://www.honda-tech.com/zerothread?id=267641 I am probly gunna run this after I blow my shit up

http://coolazz.tripod.com/turbo.html


I cannot spell and I suck at writing sorry.

[exciv2002]

Originally posted by B18CBungy
I'd swap out the B8 intake manifold for a B7 or even better, a Z6 one. The CX intake manifold is dinky. The intake tubing is about the size of exciv2002's yummy raver girl's wrist.

:rofl:

[white_n_slow]

:D