PDA

View Full Version : 94 civic dash removal ????

xxxacidmouthxxx
06-06-2003, 10:21 PM
If anyone knows how to remove the plastic (bezel) in front of the gauges. I have removed the top two screws and i am not getting anywhere.
Maverick
06-06-2003, 11:07 PM
you need to pull it straight out and hard.......there are some metal clips on plastic tabs that are holding it in.
xxxacidmouthxxx
06-06-2003, 11:09 PM
are you positive cuz i don't want to break it. It feels like something else is holding it in. Someone said there is another screw under the hazard flasher or something
xxxacidmouthxxx
06-06-2003, 11:16 PM
I think im gonna kill myself or this car.. I got these damn white faced guages and i cant even fucking rmove the dash....
stu
06-06-2003, 11:53 PM
What you need to do is pull on all parts of the bezel cover. You will notice that some places will move more than others. Then you need to inspect those other places more closely to see if you forgot a screw or if there is a clip you need to pull out or something.
95GSRB18C
06-07-2003, 12:28 AM
there is one behind the hazard switch and i believe one behind the driver vent and the rest are just clips. you will eventually get it...
gjcivic
06-07-2003, 01:20 AM
yep, watch that hazard switch..... and go to a tool store and buy some pic tools... look kinda like dental picks, just bigger, and with handles... they are great for hooking stuff and tugging, just make sure that both hands are on the tool and pulling, or you will end up doing a blood test on one of your fingers.........
forum
06-07-2003, 11:30 PM
I believe there is also a screw behind the hazard switch....
Cheio
06-08-2003, 03:05 PM
Take a small screw driver and pull out the hazard button. There's a little screw there. Take it out... On your cluster 'bevel' there's 2 small clips underneath it. Lift it up so the clips don't break off. Just start tugging the thing.
After a while the heating vents and such will break off from the heating passages (it's ok... just some styrafoam stuff =\). After the 'bevel' starts to come off you have to unclip your clock. It should be just like any other clip. A prong that you press in really... After it's off you should be able to see your cluster held on by 4 screws... Voila!